• Automated Production Line
• Special Purpose Machines & Systems
• Adhesive Dispensing
• Robot systems
• Lead Pot Robotic Handling System for
  Medical Industry
• Rotary Assembly and Test Machines & Systems
• Pallet Based Assembly for Plastic Parts
• Pallet Based Assembly for Pressed Metal  Parts
• Plug Feed and 100% Laser Measurement / Check System

• TQC Home Page
• Leak Test Machines
• Assembly Automation
• Test Machines
• Plastics Machines
• Engineering Design Services

automatic machine / system for adhesive dispensing & automatic part insertion

This system was designed to handle two cast heat exchangers, It is an example of an automatic adhesive machine.  This automatic machine applies adhesive and inserts core plugs, one at a time, into ten machined holes.  The single part anearobic adhesive was automatically dosed into the inside of the hole before the plug was inserted.

The operator loads the casting to this platform, where it indexes from the gluing head to the press tool.  Holes 1 through 5 are filled, the casting rotates 180 degrees and holes 6 through 10 are filled.   Including load and unload, the machine cycle is 120 seconds.

This is another example of TQC's experience in automatic adhesive dosing and automated dispensing.  This adhesive was a two part mix supplied from 210 litre drums which had to be kept at a controlled temperature.   The automatic dispensing gun mixed the constiuents in the required proportions before being deposited as a gasket pattern to the part.  Aswell as the X-Y motion from the table, the dispenser moved in the vertical and tilted to gain access to restricted areas.

If you have a current project requiring any automatic machines or automated systems, or you are considering improvements to your production line or process in the near future, call us and we will be happy to offer our professional advice & visit you at your site.