|
This
facility has been designed to provide a semi-automatic assembly
process and comprises of a slip chain conveyor, which conveys
8 off pallets, which in turn have inter-changeable tooling
to suit the radiator system being assembled.
There
are 4 manual workstations, a leak test and an un-load station
along the front edge of the conveyor, the opposite side of
the conveyor is simply used to return empty pallets back to
the start.
At
each of the manual stations is located an electronic torque
driver, tooling nest for drive bits and an operator interface
panel.
The
leak test station has a manually operated guard in front of
the test to protect the operator, this is interlocked to the
safety circuit.
|
