• Series 10 Standard Leak Test Machine
• Series 20 Standard Leak Testing Fixture
• Series 40 Standard Leak Testing Fixture
• Twin Station Series 40 Standard Leak Testing Fixture
• Series 40 Standard Leak Test Machine with Interchangeable Fixtures

• TQC Equipment
• Automotive Brake Leak & Flow Testing
• 'Chilled Beam' Leak Test
• Fuel Rail Leak & Burst Testing
• Fuel Tank Leak Testing
• Helium leak testing of automotive fuel pipes
• High Pressure Audit Leak Test and Datalogging System
• High Speed Leak Testing of Plastic Vials for the Medical Industry
• High Speed Leak Testing of Pipe Fittings
• Leak Testing of Engine Blocks
• Leak Test, Flexible Facility
• Leak Test Facility for Water Valves
• Medical Device Leak Testing
• Medical Filter Leak Test Machine
• Medical Shower Head Leak Test Facility
• Plastic Sump Pipe Leak Test & Inserter
• Small Medical Device Leak Test
• V6 Engine Leak Testing
• Valve Block Leak Test
• Vauxhall Leak Test Machine
• Water Submersal Leak Detection
• Weapon Leak Test

• Product Datasheets
• Video Clips

• TQC Home Page
• Leak Test Machines
• Assembly Automation
• Test Machines
• Plastics Machines
• Engineering Design Services

plastic fuel rail test facility

100% leak test with integrated burst test

This piece of equipment has been designed and built to leak test an automotive fuel rail to a leak specification limit of 4mm3/sec at 3.5 bar. A second test was carried out on every 100th part, this is a high pressure burst or proof test at 25 bar for a duration of 1 minute.
	Single station machine with manual load / unload
	Automatic sealing of single fill port and two end ports with four fixed seals for the side ports.
	Interchangable fixtures for diffrent variants of fuel rail
	Nolek TS600 Leak Test Instrument
	Air decay leak test @ 3.5bar
	Burst test @ 25 bar from bottled gas
	Hot stamping of tested parts
	Fully enclosed fixture
	PLC controlled

All TQC equipment is supplied with full CE marking, operator and service manuals, spares lists and maintenance wiring diagrams.

If you have a current project that you are already looking at, or you are considering improvements to your production in the near future, call us and we will be happy to offer our professional advice & visit you at your site.