Improve your leak
detection using the latest helium leak test instrument from
Nolek. The HEDOS instrument allows clean, dry and high sensitivity
leak testing combined with leak area location. On startup,
the automatic evacuation and Helium filling sequence will
begin. Wait for the green signal and then take the sniffer
probe and check for leaks. Press stop when you have finished
and the test piece evacuates.
Completely
dry leak detection
Measures
& locates both large and small leaks
Test
hot welded joints
1000's
of times more sensitive than air decay
Pneumatics
Test
medium
Helium
Required
connections
Min.
5 bar air & helium
Test
pressure adjustment
Manual
regulator & ejector
Measuring
sensor
Helitest
with sniffer probe
Sensitivity
2
x 10-5 mbar.l/sec
Calibration
leak
Ordered
separately
Connection
thread
G
1/4"
Programs
100
Electronics
Processor:
PLC
controlled fill and evacuation sequence
Presentation:
Display
with measuring value and signal lamp for sniffer ready
