leak
testing information and leak test machines and systems from TQC
| TQC
Ltd have supplied automatic leak test equipment for over 20
years. The supply has included simple manually connected leak
test fixtures to fully automatic, high speed production leak
test facility. TQC supply leak testing equipment to meet the
customers requirements |
|
| A
niche area of engineering, leak testing is sometimes referred
to as pressure testing or vacuum testing. TQC has the knowledge
and expertise to assist the customer from the basics, in specifying
the acceptable leakage rate, or leak limit, then in the design
and supply of the leak test machine or test system. The customers
can then reliably check how much an item is leaking. |
|
There are many different forms
of leak test methods that can be used, from the basic submersing
of the test object under water in a dunk tank and watching
for bubbles for leak location, to the highly accurate helium
leak testing required for very tight leak limits.
A commonly used leak test solution
is air decay leak testing, this is a good, economical and
quantifiable method of testing whether a product passes the
specified leak limit, these type of solutions can range from
manually loaded to fully automatic production test facilities.
TQC combines standard leak test
instuments with specially designed fixtures and sealing mechanisms
using the in house design facilities to provide the best solution
to suit the specification. This test machine capability is
enhanced by our experience in automated production line equipment
and process automation resulting in a complete service to
industry.
So if you need a solution to
test your product for leakage, TQC can supply the leak testing
equipment to suit.
|
| Air
Decay Leak Testing provides the following benefits: |
![[Bullet]](../images/bullet.gif) |
Quantifiable
result |
|
|
Calibration
to ISO9000 etc. |
|
|
Fast
clean and dry test |
|
|
Easily
incorporated into automatic or manual line |
|
Automated
pass/fail limits |
|
|
Automatic
pass/fail marking |
|
|
Data
outputs for SPC analysis |
|
|
| For
further details of leak testing and leak test machines look
at some of the other pages. As a taster, products succesfully
leak tested over the past years include the following |
| Automotive |
Cylinder
Blocks & Heads |
Timing
& Cam Covers |
| Manifolds |
Gearbox
& Clutch Housings |
| Fuel
Tanks |
Turbochargers |
| Engineering |
Pumps |
Valves |
| Taps &
Pipework |
Hydraulic &
Air Cylinders |
| Sprinklers |
Electronic
Enclosures |
| Medical |
Sealed
capsules |
Shower
Head |
| Filters |
Blister
Packs |
| Other |
Domestic
Appliances |
Shotgun Cartridges |
| Handheld Weapons |
Chilled Beam
Ceiling Units |
If you have a current project that you are
already looking at that requires leak testing, or you are considering improvements to your
production in the near future, call us and we will be happy to offer our professional
advice & visit you at your site.
|
TQC Ltd, Hooton Street, Carlton Road,
Nottingham, NG3 2NJ, United Kingdom
Tel: +44 (0)115 9503561
Fax: +44 (0)115 9484642
E-mail: sales@tqc.co.uk
|
|
