• Series 10 Standard Leak Test Machine
• Series 20 Standard Leak Testing Fixture
• Series 40 Standard Leak Testing Fixture
• Twin Station Series 40 Standard Leak Testing Fixture
• Series 40 Standard Leak Test Machine with Interchangeable Fixtures

• TQC Equipment
• 'Chilled Beam' Leak Test
• Fuel Rail Leak & Burst Testing
• Fuel Tank Leak Testing
• High Pressure Audit Leak Test and Datalogging System
• High Speed Leak Testing of Plastic Vials for the Medical Industry
• High Speed Leak Testing of Pipe Fittings
• Leak Testing of Engine Blocks
• Leak Test, Flexible Facility
• Leak Test Facility for Water Valves
• Medical Device Leak Testing
• Medical Filter Leak Test Machine
• Medical Shower Head Leak Test Facility
• Plastic Sump Pipe Leak Test & Inserter
• Small Medical Device Leak Test
• V6 Engine Leak Testing
• Vauxhall Leak Test Machine
• Water Submersal Leak Detection
• Weapon Leak Test

• Product Datasheets
• Video Clips

• TQC Home Page
• Leak Test Machines
• Assembly Automation
• Test Machines
• Plastics Machines
• Engineering Design Services

medical shower head leak test facility

The machine was designed to accept manually loaded moulded plastic parts and to leak test the inductance weld to ensure water did not leak through.

To test the parts at a differential pressure of 5 bar, a combination of external vacuum and internal test pressure was used, the maximum leak rate that was acceptable was 80mm3/sec.

The leak test facility used manual loading and unloading and achieved typically 120 parts per hour.

	Medical industry Nolek S9 Leak Test Instrument with fixture control Inductance Weld integrity leak test Auto start on drawer closure Drawer interlocked on a failure Single Character fail mark Clean room environment Portable

If you are currently considering a medical grade or clean room specification leak test application, or ant production automation contact TQC to discuss your requirements.