fixture and transfer trolley
for car bumper robot
painting operations
 TQC
are specialists in car bumper fixtures and laser cut profile jigs
for plastic components assembly, plastic finishing and bumper
production equipment
Fixtures of this design have been provided
for the automotive industry. These jigs or cams handle front or rear bumpers through an
automated robot painting line. The plastic bumper is mounted onto a paint jig then
subsequently onto a trolley top.
The paint jigs are laser cut to suit the
bumper profile and incorporate positive locations to accurately align the part.
To assemble and check the paint cams, welding
is carried out within an accurate test fixture. This test fixture mates with the same face
as the jig does with the bumper, Co-ordinate measurement is used to measure the check
fixture against car bumper data.
The trolley top is again laser cut to suit
the paint cam and the paint line transfer system, the capacity is based on customer
requirements and the overall bumper size, 4 or 6 up is typical.
TQC can also supply fixtures for bumper
assembly and handling for other areas with the production system.
Component Parts
 |
Paint
Jig or Cam |
 |
Check
Fixture |
 |
Jig
within Fixture |
|
TQC Ltd, Hooton Street, Carlton Road,
Nottingham, NG3 2NJ, United Kingdom
Tel: +44 (0)115 9503561
Fax: +44 (0)115 9484642
E-mail: sales@tqc.co.uk
|
|
