plastic sump pipe leak test and inserter
vacuum leak
test / hot insert / cold insert
 |
Simple to operate |
|
Floor to floor cycle time of
35s for 2 components |
|
80% Vacuum Leak Test |
|
1 Hot Insert (2500C) |
|
2 Cold Inserts |
|
Contolled by a PLC |
|
Calibration satisfies the
requirements of BS5750 and ISO9000 |
This machine combines TQC's experience of
leak detection and automatic inserting. In the case of this machine, if the leak
test fails, the automatic inserting process will not actuate.
 vacuum leak test
The test pieces and the reference volume are
simultaneously evacuated. The air in the system is then allowed to stabilise, with
the supply valves all closed. The differential pressure is then measured using a
transducer.
inserts
Both types of insert are presented to the
component by a combination of vibrating bowl feeders and automatic handling system.
There are two oval inserts and one hot insert which is automatically melted into the
plastic.
safety guard system
A well proven safety system, built to UK and
European safety standards allows a fast loading and unloading of the test pieces.
full documentation
The equipment is supplied with full CE
marking, operator and service manuals, spares lists and maintenance wiring diagrams.
If you have a current project that you
are already looking at, or you are considering improvements to your
production in the near future, call us and we will be happy to offer
our professional advice & visit you at your site.
|
TQC Ltd, Hooton Street, Carlton Road,
Nottingham, NG3 2NJ, United Kingdom
Tel: +44 (0)115 9503561
Fax: +44 (0)115 9484642
E-mail: sales@tqc.co.uk
|
|
